Roller Grill RFE 8 D Notice D'installation Et D'utilisation page 16

The setting of the temperature is made by the thermostat/commutator.
To turn on your fryer and preheat the oil, set the thermostat control knob (n°3 on picture) on the
desired heating power. The orange pilot light (n°1 on picture) ignites until the desired temperature
is reached.
NB: Half fill the basket (s) (n°4 on picture) up (1.2kg of French fries per basket) and plunge
it (them) slowly into the oil
1
2
Thermostatic pilot light
1
Thermostat/commutator
3
5. FUNCTIONING / MANIPULATION
a) Installation / assembly:
- Unpack carefully the device of its packaging.
- Remove the protective film around the machine.
- Place the fryer on a plane, solid and heatproof surface.
- Never place the device near a wall or near a partition makes of combustible materials even if it
is very well isolated.
- A distance of minimum 10 cm with the partition or the wall is necessary.
- Place the product to enable easy access to the plug.
- Then place all the accessories and screw up the feet.
- Keep the lid near the fryer to enable you covering it after use or in case of fire.
2
On/off pilot light
4
Baskets
3
4
16