Roller Grill RFE 8 D Notice D'installation Et D'utilisation page 17

b) First starting:
Before the first use, wash the machine and all accessories.
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the values indicated
on the descriptive plate.
- Check that neither the cord nor the plug are damaged.
- Make sure that every control knob is positioned on 0.
- Unwind completely the electric power cable and connect it in a plug connected with the earth.
- The device is connected.
The machines intended to be linked in a permanent way with the fixed pipes must be provided
with a device of disconnection.
The equipotential connection marked by this symbol
conductive connection of your electric installation
NB: in case of connection of the device in a plug without earth protection or directly on the elec-
tricity network, confide its connection to a qualified person .
c) Use of device :
Command and display
Thermostat (n°3 on picture)
Safety thermostat (under the control box)
Microswitch (under the control box)
Orange pilot light (n°1 on picture)
Green pilot light (n°2 on picture)
Putting on
- Make sure that the draining taps are closed.
- Insert the control unit into the slot being sure that it is pushed in all the way. The deep
fryer will not function if the control unit is improperly inserted, the micro switch will pre-
vent operation.
- Pour oil into the container when heating elements are cold. The oil level must be between
the MIN (small line) and MAX (large line) marks. The use of solid fats is forbidden.
- Turn on the thermostat/commutator (n°3 on picture) to the desired position.
- When the orange pilot light is off, your deep fryer is ready for cooking.
- Half fill the baskets up (1.2kg of French fries per basket) and plunge them slowly into the
oil
- When cooking is finished, lift up the baskets and place them on their holders.
must be linked with the equipotential
Function
Temperature setting
Automatic stop in case of overheating
Automatic stop in case of improper posi-
tioning of the control unit
Oil is warming (pilot light on)
Oil is hot (pilot light off)
Machine is on (pilot light on)
Machine is off (pilot light off)
17