Publicité
Les langues disponibles
Les langues disponibles
Operation and maintenance
Remove all packaging of the device.
Place the device on a flat stable surface. The device is not suitable for installation and outdoor
use.
Use
Remove the cover on the bottom of the scale and place a CR2032 lithium battery, replace the
cover.
Press the on/off button (no. 2) and select the desired weight indicator by pressing the UNIT
button (no. 1).
The device can be set to kg (kilograms), g (grams), lb (pounds) of oz (ounces). The device is
equipped with an automatic turn off function when the device is not used for some time.
The device can also manually be turned off by pressing the on/off and tara switch (no. 2) for
several seconds.
If the decice is turned on the →0← and the
Place the ingredients to be weighed on the weighing surface (no. 4), the display shows the
weight and the
symbol appears in the display to indicate that the weight indicated is the
correct weight value. If the ingredients of the weighing surface are removed, there will appear
the 0 and the →0←
Weigh with the tara function (the adding function)
With the adding function you can reset the display to 0 after placing a product.
This allows you to weigh in a bowl.
Do as follows:
Place an empty bowl on the scale and press the scale on with the on/off and tara switch (no. 2)
and wait till 0 appears on the display. Place the first ingredient you wish to weigh in the bowl.
Read the weight shown on the display
to reset the scale to 0 and you can add the next ingredient.
By repeating the step you can weigh multiple ingredients (e.g. baking ingredients).
Display codes
The battery is nearly empty, replace the battery.
EEEE
There is too much weight on the scale, remove the weighing ingredients, and turn
the device off and back on again. The device can be at least 2 grams and 5000
grams maximum.
OUTZ
General disturbance, weight can not be measured. Turn the power off and back on
again.
UNTZ
The scale is not level or is unstable. Place the scale on a level and stable surface.
Switch the device off and back on again.
Cleaning the unit
Clean the unit with a damp cloth, do not use harsh or abrasive cleaners. Do not use abrasive
sponges or other sharp objects.
Do not immerse in water or other liquids. Do not place in the dishwasher
symbols in the display, the device is ready for a new weighting.
After weighing, press the on/off and tara switch (no. 2)
.
symbols appears in het display (no. 3).
7
UK
Publicité
