Machine Transportation - American Sanders Clarke EZ Sand Manuel D'utilisateur

Machine Transportation

To transport the machine, follow this procedure:
1. Unplug machine from wall outlet and wrap cord.
2. Raise and lock the handle to the vertical and
upright position. To lock the handle, unhook the
knurled collar by raising and twisting it (see figure
1), and then allow it to slide into the black cast iron
weight (see figure 1A).
3. Unlock the three levers that attach the black cast
iron weight to the base machine by lifting up.
4. Unplug the interconnect cord from the base ma-
chine. Now the handle can be lifted separately and
placed in the cargo hold.
5. The base machine can be lifted by grasping both
the front lift handle and underneath the axle area
(see figure 2).
WARNING: The machine is heavy (67 lbs./34kg).
The handle weight is 35 lbs./16 kg. To
avoid injury or damage to the machine
use a firm grip and proper lifting
technique. Get assistance if neces-
sary.
6. Secure machine to prevent movement in cargo
area.
®
Clarke American Sanders Operator's Manual (EN) - EZ Sand
ENGLISH
EN
Figure 1
Figure 1A
Fgiure 2
- 5 -