Introduction; Machine Specifications; Machine Transportation - American Sanders OBS-18DC HDTR Mode D'emploi

Section - A
The OBS-18 or OBS-18DC can be used on a variety of surfaces. It is an ideal tool for wood flooring maintenance and restoration
work. It is also suitable for cleaning hard surfaces such as tile or Terrazzo.

Machine Transportation

To transport the machine, follow this procedure:
1. Unplug machine cord from the wall outlet and wrap the cord around the
handle.
2. Raise and lock the handle in the upright position. To lock the handle, pull
up on the Handle Release Compression Lever (see Figure 1).
3. Grasp the machine at the lift points (see Figure 2) and place in cargo area.
WARNING: The machine is heavy (125 lbs / 57 kg). To avoid injury or
damage to the machine use a firm grip and proper lifting technique. Get
assistance if necessary.
4. Secure machine to prevent movement in cargo area.

Introduction

Machine Specifications

Model
Model Number
Voltage / Frequency
Amperage (A)
Motor
Pad Size
Power Cable
Orbits Per Minute
Orbit Diameter
Shipping Weight
Noise (dBA)
Vibration (m/s/s)
Figure 1
OBS-18DC
07014A
115V / 60Hz
10
1 hp
750 Watts
12" X 18"
(305mm X 457mm)
40ft 12-3 Ga Gray
Rubber Jacketed
3600
1/4" (6.4mm)
125 lbs (57 kg)
74
11.2
PERSON #2
6
English - EN
Figure 2
PERSON #1