Led Panel - LEGRAND KEOR LP 1 Manuel D'installation

Control
Symbol
Key
ON
OFF
Self-Test
Manual
Bypass
28
®
a. UPS Power-On Switch
(Press and hold until the buzzer beeps.)
b. Alarm silence
c. Error Code Display Mode
After an alarm, press to mute the alarm buzzer and show an
Error Code. (Do not hold for > 1 second.)
UPS Power-Off Switch
(Press and hold until the buzzer beeps.)
a. Commands the UPS to perform self-testing
(Press and hold until the buzzer beeps.)
b. Battery/Load Test Mode
(Do not hold for > 1 second.)
1
Press the "ON" key and "Self-Test" key simultaneously for
three seconds to transfer from "Inverter to Bypass" (The
1
bypass LED will continuously blink and the buzzer will beep
2
intermittently.) or "Bypass to Inverter" when the UPS is in
1
on-line mode and the Bypass Voltage is Normal.
1
2
2
2

3 LED Panel

Description