Opening The Door And Changing The Opening Direction; Using The Drier; Precautions For Fabrics; Recommendations Prior To Drying - Ardo CDR07SU Mode D'emploi

OPENING THE DOOR AND CHANGING THE OPENING DIRECTION

7
8
In the case of doubt as to the type of fabric, read the label on the item itself.
Almost all items that can be machine dried have this information specifi ed on the label.
To avoid static electricity being generated in the items, add a conditioner to the rinse cycle of the washing
machine.
Remove synthetic materials from the drum immediately to prevent them from creasing.
SORTING THE WASHING
Before drying the washing, spin it at the recommended
rpm for the type of load. Spinning at maximum rpm
will result in up to a 35% saving in energy. The
higher the spin speed, the better the drying result.
Using a softener in the wash cycle will improve
drying and save time. Before drying the washing in
the drier, check the items to make sure they can be
machine dried. Refer to the clothing care symbols
on the labels.
If the label has no drying symbol, proceed as
follows:
White/coloured washing and crease-proof
washing can be dried at normal temperature
using the appropriate drying programme.
Delicate washing, acrylics for example, must
always be dried at low temperature.
SM2164
INSTALLING THE APPLIANCE
Press the right side of the door (fi g. 7) to open it. If the door has been reversed,
press the left side.
The direction of the drum door opening can be modifi ed according to needs (fi g.
8).
- N.B.: This operation must only be carried out by a qualifi ed technician.
Contact the customer service centre.

USING THE DRIER

PRECAUTIONS FOR FABRIC TYPES

RECOMMENDATIONS PRIOR TO DRYING

General advice:
Jersey often shrinks, not only in the wash but also
during drying.
Pure linen.
Only dry garments with specific drying
instructions on label, otherwise, the fabric could
roughen.
In order to avoid staining, never dry dark
coloured washing together with light coloured
washing.
17
GB