Commissioning - Lenze Global Drive Keypad E82 Instructions De Montage

5

Commissioning

5 Commissioning

Connect the keypad to the AIF interface on the front of the standard device.
You can also connect or remove the keypad during operation.
‚
As soon as the keypad is supplied with voltage, it carries out a short self test.
ƒ
The keypad is ready for operation if the operating level is displayed:
0
Current status of the standard device
1
Display of the output frequency of the inverter (the parameter to be displayed can be selected
in C0517/1)
2
Active error message or additional status message
3
Current value in % (the operating status to be displayed can be selected in C0004)
„
Press V to quit the operating level.
60
l
9371BC018_E82
EDK82ZBC DE/EN/FR 4.0