Parameterisation 8200 Vector/8200 Motec; Change And Save Parameters - Lenze Global Drive Keypad E82 Instructions De Montage

7

Parameterisation 8200 vector/8200 motec

Change and save parameters

All parameters for controller setting or monitoring are saved in codes. The codes are
numbered and labelled in the documentation with a "C". Some codes store the parameters
in numbered subcodes", so that a clear parameter setting is ensured (e. g.: C0517 User
menu).
The codes are described in detail in the system manual of the drive controller.
)
Note!
Your menu settings are always saved to parameter set 1.
Two menus can be used for saving settings to parameter sets 2, 3 or 4:
The "Code list" in menu 2 provides direct access to all available codes.
ƒ
The "Param managm" in menu 7 serves to copy parameter set 1 to other
ƒ
parameter sets.
– Please observe that your "own basic setting" will be overwritten with
the settings of parameter set 1 during the copy process!
EDK82ZBC DE/EN/FR 4.0
Parameterisation 8200 vector/8200 motec
l
Change and save parameters
7
65