Lenze Global Drive Keypad E82 Instructions De Montage page 94

7 Parameterisation 8200 vector/8200 motec
Menu structure
Main menu
No. Display
13 FIF−field bus
14 Motor/Feedb.
94
Submenus
No. Display
13.1 Identify
13.2 FIF managem
13.3 POW setup
13.4 PIW setup
13.5 Com.err setup
Ñ Ñ Ñ Ñ Ñ Ñ Ñ Ñ Ñ Ñ Ñ Ñ Ñ Ñ
Change to the code level to display the contents of the data words. The
contents of the data words are displayed as decimal values.
Ñ Ñ Ñ Ñ Ñ Ñ Ñ Ñ Ñ Ñ Ñ Ñ Ñ Ñ
13.6 Monit PIW
13.7 Monit POW
13.8 Monit FIF−IN
13.9 Monit FIF−OUT
14.1 Motor data
14.2 Feedback DFIN
l
Description Description
Configuration of the operation
with fieldbus function modules
and display of the contents of the
process data words
Only active with fieldbus function
module
Display of the software version
and the type of the fieldbus
function module
FIF communication parameters
Process data from the master to
the fieldbus function module
Process data from the fieldbus
function module to the master
Monitoring of the
communication
Display of the process data from
the fieldbus function module to
the master
Display of the process data from
the master to the fieldbus
function module
Display of the process data from
the fieldbus function module to
the controller
Display of the process data from
the controller to the fieldbus
function module
Input of motor data,
configuration of speed feedback
Motor data
DFIN frequency input, encoder
EDK82ZBC DE/EN/FR 4.0