¼
Tips
Make sure that the camera boss and the multi connector of this unit are fully engaged
with the tripod receptacle and the multi connector of your camera.
To remove your camera
Hold the tilt arm of this unit and lift up your camera.
¦
Notes
When removing your camera, always lift it perpendicular to the tilt arm. Forcibly
removing your camera at an angle or sliding it sideways may damage it.
¼
Tips
If your camera is tilted so far that it is difficult to remove, turn the camera off and set
the ON/OFF (power) switch of this unit to ON.
The tilt arm of this unit returns to the initial position so you can easily remove the
camera.
19-GB