Bergstrom COMPACTO T5 Instructions De Montage page 14

COMPACTO T5
EN
1- Put the T5 Compact on the roof and try that the
final position corresponds to the supplied front X
and is in a flat surface
2- Once the position is defined, remove the case
and mark (6) holes Y, trying to correspond the
(4) holes of the template with the (4) holes on
the rear roof. ATTENTION TO THE ARROW
INDICATING THE DIRECTION.
3- Mark cuttings and holes and make them. Protect
the edges with antirust.
4- Place the strip on lower part of compact, as
shown.
1
Y
X
!
Verify the watertightness of the whole
installation to prevent leak.
14
4