Table des Matières
Publicité
WATER TREATMENT USING CHEMICALS
DEPURATION
The ideal values for a hygienic and comfortable use of the pool are the following:
VALUE OF CHLORINE MORE THAN 1
PPM
VALUE OF PH BETWEEN 7.2 AND 7.4
Keeping the ideal values of chlorine is essential for conservation and water hygiene. It prevents
the born of algae and the proliferation of any type of pollution of nature organic in the pool.
Please examine with a special tester the concentration of chlorine in the pool at intervals of 1-2
days maximum to restore what consumed.
Table 1 (DOSE OF CHLORINE) shows the amount of chlorine to be introduced in the pool
to increase by one unit the value measured by your tester.
(drops, tablets or electronic tester)
Table 2 shows the doses of PH to be placed in the pool to decrease a 0.2 value of the pH
measured by your tester.
The introduction of chlorine based products
in the pool should always be through the
floating head of the skimmer with the pump
switched on, this to prevent concentrated
doses of solid product to be in contact
with the walls or the bottom of the liner.
107
Publicité
Table des Matières
