Selection Adjustment Weight - KERN 440 Mode D'emploi

Selection In the model series KERN FKB_A, the adjustment weight can be
adjustment selected from three pre-set nominal values (approx.1/3; 2/3; max)
weight (refer also to following table, factory setting with grey
background). In order to achieve high-quality weighing results in
the sense of the measuring technology, it is recommended to
select the nominal value as high as possible. The non delivered
adjustment weights can be purchased from KERN as option.
 In weighing mode keep the PRINT key pressed until [Unit]
 Press the MODE key several times until „CAL" is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Select the desired settings by pressing the MODE key.
 Use the SET key to confirm selection.
440-21N 440-21A
10g 10g
20g 20g
30g 40g
40g 50g
60g
440-47N 440-49N
500g 1000g
1000g 2000g
1500g 3000g
2000g 4000g
440-BA-e-1744
appears.
440-33N 440-35N
50g 100g
100g 200g
150g 300g
200g 400g
440-49A 440-51N
1000g 1000g
2000g 2000g
5000g 3000g
6000g 4000g
440-35A 440-43N 440-45N
100g 100g
200g 200g
400g 300g
500g 400g
600g
440-53N
1000g
2000g
5000g
6000g
200g
500g
700g
1000g
440-55N
1000g
2000g
5000g
6000g
27