Table des Matières
Publicité
HOW TO FIT A LOGSTORE
Remove the internal components of the stove and fill the
chamber with material to prevent the bricks from falling.
Additionally, prepare a soft elevated surface.
Position the Logstore legs and use the leveling feet to secure them to the body of the stove. Use a
spanner or a socket wrench to fully tighten.
Right the stove and see if the legs are in the correct position; they should be inline with the front
legs of the Woodand and have an even overhang where the legs meet the stove body. If not then
loosen one leg at a time and adjust until satisfied.
.
Tilt the stove onto it's side to allow easy and safe access
to the feet. Unscrew the levelling bolts at the foot of the
stove leg.
19
Publicité
Table des Matières
