en-us Care and Maintenance
To check or clean the filter system:
Unscrew the Large Object Trap as
1.
illustrated and remove the entire
filter system.
Remove the microfilter from the
2.
fine filter for easier cleaning.
Rinse the filters under running
3.
water and use a soft brush to
clean.
do not use abrasive
Note:
brushes or steel wool, etc., as
they may damage the filter.
Reinstall the filter system in
4.
reverse sequence and lock into
place by screwing the Large
Object Trap until the marking
arrows align.
32
Spray arms
Check spray arms 1*, 1B for
grease and limescale deposits. If you
find such deposits:
Fill detergent dispenser 1j with
■
detergent and start the appliance
without utensils in the cycle with
the highest rinsing temperature.
~ "Wash Cycle Information"
on page 25
Clean the appliance with
■
detergents/appliance cleaners
which are particularly suitable for
use with dishwashers.
Unscrew the upper spray arm
■
1* and pull off the lower spray
1B arm as shown. Inspect for
deposits.