Instructions For Use; Normal Operation - Philips SBC RU 220/00 Mode D'emploi

RU220- page 4
SBC RU 220
INTRODUCTION
Congratulations on your purchase of this Philips SBC RU 220 remote control.
The SBC RU 220 is designed for easy operation of most equipment in the home.
It can replace up to 2 remote controls of almost any brand, for televisions (TV)
and video recorders (VCR), even if the original remote control is lost or broken.
The SBC RU 220 is ready for use with Philips TV, and VCR equipment. To operate
equipment from other brands, you have to set up the SBC RU 220 by following 3
easy steps. If the brand of your equipment is known, follow the procedure
described in chapter: SETTING UP BY CODE ENTRY
If the brand of your equipment is unknown or not in the code list, you can have
the SBC RU 220 do an automatic code search for your equipment. See chapter
SETTING UP BY AUTOSEARCH.
FUNCTIONS OVERVIEW (see diagram on page 3)
A Indicator LED
B
Device buttons
TV VCR
C y
Power
D a External / source select
E P+, P- Next / previous programme
TV volume Controls
F a
TV Volume louder / softer
G c
Mute
Even if you're operating the VCR, you can directly access the volume of the TV
with these buttons
H Digits 0..9
I -1/2 digits, 10, 1-
J FastText keys / VCR
red
green
yellow
blue
white
K a Teletext on
L I
Teletext off
M S Shift button
Depending on your equipment, some buttons may work differently. Check the
manual of your equipment to know which functions it will operate.

NORMAL OPERATION

1. Press TV or VCR to select the device you want to operate
2. Press any of the function buttons to operate that function.
SHIFT KEY FOR EXTRA FUNCTIONS
Some equipment has more functions than are available here. With the SHIFT
button you can operate some extra functions of your equipment.
Hold SHIFT while pressing another button:
SHIFT - a + /a -:
SHIFT - P+ / P- :
Try the other SHIFT keys to discover other functions of your equipment.
4

Instructions for use

9 Stop
5 rewind
6 wind
2 play
; pause
Change colour,
Change brightness.