Operation; Preparation; Checking Connection; Setting Of Each Knob - Denon PMA-2000AE Mode D'emploi

ENGLISH

Operation

SOURCE DIRECT
TREBLE
BASS BALANCE

Preparation

2 Checking connections
• Make sure that all the connections are proper by
referring to the rear panel.
• C h e c k t h e p o l a r i t y ( p o s i t i v e a n d n e g a t i v e ) o f
connections, and the directivity of stereo separation
(right cord to right channel terminal, and left cord to left
channel terminal).
• Check the directivity of pin cord connection.

2 Setting of each knob

• Turn the VOLUME control knob counterclockwise, to
minimum position.
• Set the BASS, TREBLE and BALANCE control knob, to center
position.
• Set SOURCE DIRECT switch to "OFF (
After checking the above items, turn on the power, the amplifier
is set in the ready mode in a few seconds.
P.DIRECT
INPUT SELECTOR
VOLUME
REC OUT SELECTOR
)".
£
POWER
FUNCTION
VOLUME

Playing the input source

1
Select the input source to be played.
(Main unit)
When "PHONO" is selected, pr ess the CARTRIDGE
switch on the rear panel of the main unit to select "MC
( )" or "MM ( )".
¢ £
2
Start playback on the selected component.
For operating instructions, refer to the component's
manual.
3
VOLUME
Turn the
BALANCE
control knob to yield an appropriate
volume and sound quality.
NOTE:
If P. DIRECT button is set to ON position, P. DIRECT terminals is
selected, and input indicator.
9
ENGLISH
DIRECT PROGRAM CALL
1 2 3
4 5 6
7 8 9
0 +10 CLEAR
FUNCTION
MUTING
FUNCTION
(Remote control unit)
BASS TREBLE
, , and