Keep Warm Function; Bridge Function; Grill Function; Locking The Controller - Novy 1821 Panorama Pro Mode D'emploi

5.3.9 Keep warm function

This function makes it possible to automatically reach and
maintain a temperature of 42°C, 70°C or 94°C.
This prevents pans overflowing or your food sticking to the
bottom of the pans.
Switching the keep warm function on and off:
Keep warm 42°
Press [Keep warm control key] once
Keep warm 70°
Press [Keep warm control key] twice
Keep warm 94°
Press [Keep warm control key] 3 times
Switching the keep warm function off
Glide your finger over the slider
or press [ Keep warm control key ] until [ 0 ]
The maximum duration of the keep warm function is 2 hours.

5.3.10 Bridge function

This function allows you to link the 2 left and 2 right zones so
they operate as 2 large zones. This function can be activated
manually, or automatically should a large pot/pan be placed on
the cooking surface.
Bridge function:
Manual activation
Simultaneously press [Keep warm control key]
of the 2 zones A1, A2 or B1, B2 to be linked.
Automatic activation
Place a pot on the zones A1, A2 or B1, B2.
Increase the power
Glide your finger over the left slider until you
reach the desired power, both zones display the
chosen power.
Switch bridge function off
Simultaneously press [Keep warm control key]
of the 2 zones to be linked.

5.3.11 Grill function

This special cooking function optimises heating and warming
in a cast iron pot/grill plate. This will ensure improved results
of the food you are cooking. The zones A1 and A2 or B1 and
B2 will be automatically linked to one another using the bridge
function.
8
Display
U
U
U
0
0 9
to
Display
0
0‐9
0
Activate
Simultaneously press the slider of the two
cooking zones A1, A2 or B1, B2.
Increase the power
Glide your finger over the left slider until you
reach the desired power; both zones display
the chosen power.
Switch grill off
Simultaneously press the slider of the two
cooking zones.

5.3.12 Locking the controller

To avoid a hob selection being changed, during cleaning for
example, the controller must be locked (except the on/off
button).
Lock
Hold finger on for 6 seconds
Unlock
Hold finger on
for 6 seconds

6 Controlling the extraction tower

6.1 Extractor hood control panel

Switch on/lift extraction tower position
Decrease extraction speed
Increase extraction speed
Switch off/lower extraction tower position
Extraction speed indication
Cleaning indication for grease filter
Cleaning indication for recirculation filter (optional)
Preset extraction function
Extractor hood lock button
– 71 –
Grill function:
Locking:
Extraction control
Display
flashes
Display
LED
lights:
LED
goes out