Automatic Cooking; Pause Function; Recall Function - Novy 1713 Mode D'emploi Et D'installation

After a few seconds the control light stops blinking.
As soon as the selected cooking time is finished the timer display will blink [ 00 ] and a sound will
be heared.
To stop the sound and the blinking it is enough to press the display [ 00 ]. The hob switches off.

Automatic cooking

All the cooking zones are equipped with an automatic "go and stop" cooking device. The cooking
zone starts at full power during a certain time, then reduces automatically its power on the pre-
selected level.
 Start-up :
Action
Zone selection
Full power setting
Automatic cooking
Power level selection
(for example « 7 »)
 Switching off the automatic cooking :
Action
Zone selection
Select Power level

Pause function

This function brakes all the hob's cooking activity and allows restarting with the same settings.
 Startup/stop the pause function :
Action
Engage pause
Stop the pause

Recall Function

After switching off the hob (0/I), it is possible to recall the last settings.
 cooking stages of all cooking zones (power)
 minutes and seconds of programmed cooking zone-related timers
 Heat up function
The recall procedure is following:
 Press the key [0/I]
 Then press the key [ II ] within 6 seconds
The precedent settings are activated.
Control panel
press display [ 0 ] selected
slide on the "SLIDER" to [ 9 ]
re-press on display "SLIDER" [ 9 ]
slide on the "SLIDER" to [ 7 ]
Control panel
press [ 7 ] from the zone
slide on the "SLIDER"
Control panel
press [ II ] key
during 2s
press [ II ] key
during 2s
press an other touch or
slide on the "SLIDER"
53
Display
[ 0 ] and control light on
pass from [ 0 ] to [ 9 ]
[ 9 ] is blinking with [ A ]
[ 9 ] pass to [ 8 ] [ 7 ]
[ 7 ] is blinking with [ A ]
Display
[ 7 ] blinking
with [ A ]
[ 1 ] to [ 9 ]
Display
displays [ II ] in the
heating zone displays
pause control light is
blinking
pause control light is off