Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MIXER PANEL
1.
MIC INPUT – This input accepts 1/4" and XLR connections. The
signal from this input can be sent to a channel using the
CROSSFADER ASSIGN function.
2.
CUE MIX – Turn to mix between Cue and Program in the
Headphone channel. When all the way to the left, only channels
routed to CUE will be heard. When all the way right, only the
Program mix will be heard.
3.
CUE GAIN – Adjusts the level of the headphone audio.
4.
BOOTH VOLUME – Adjusts the Booth output level.
5.
STEREO/MONO SWITCH – Selects whether the audio output is
in Stereo or Mono.
6.
MASTER VOLUME – Adjusts the output volume of the Master
mix.
7.
INPUT SELECTOR – Selects the input source to be routed to the
corresponding channel. Input jacks are located on the rear panel
(plus the mic input on the top panel).
8.
CHANNEL GAIN – Adjusts the channel's pre-fader and pre-EQ
gain level.
9.
CHANNEL TREBLE – Adjusts the high (treble) frequencies of the
corresponding channel.
10.
LED METERS – Monitors the audio level of the Master mix.
11.
CHANNEL MID – Adjusts the mid-range frequencies of the
corresponding channel.
12.
CHANNEL BASS – Adjusts the low (bass) frequencies of the
corresponding channel.
13.
CROSSFADER ASSIGN – Assigns a deck to the left or right side
of the crossfader.
14.
CHANNEL
FADER
corresponding channel.
15.
CROSSFADER – Blends audio that is assigned to the crossfader.
Slide this to hear Deck A and slide this to the right to hear Deck B.
LCD FEATURES
1.
PLAY / PAUSE – This shows when the unit is playing or
paused.
2.
CUE – Flashing when the unit is setting a cue point. Lit
continuously when the unit is paused at a cue point.
3.
TRACK NUMBER – Shows the current track number.
4.
TOTAL TRACKS – Shows the total number of tracks on the
CD.
5.
MP3 – Indicates when there are MP3s present on the disc or
connected USB device.
6.
MINUTES – Shows the minutes elapsed or remaining depending on mode setting.
7.
SECONDS – Shows the seconds elapsed or remaining depending on mode setting.
8.
FRAMES – The CD player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or
remaining depending on mode Indicates whether the time shown on the LCD is the elapsed time for the track, remaining
time for the track, or total remaining time for the entire CD.
9.
TIME MODE – Indicates whether the time shown on the LCD is the elapsed time for the track, remaining time for the
track, or total remaining time for the entire CD.
10.
BPM – The tempo, which is indicated in BPM (beats per minute).
11.
PITCH (%) – Shows the percentage change in pitch.
12.
RANGE (KEY LOCK) – Indicates when Key Lock Mode is engaged. The number next to the lock icon indicates how far
away the track's current key is from its original key (in semitones).
13.
LOOP – Indicates when a loop is programmed. When the indicator is flashing, a loop is currently playing.
14.
TEXT DISPLAY – Displays folder names, CD information, and MP3 tag information.
–
Adjusts
the
audio
11
12
13
14
level
on
the
3
1 2
4
13
9
1
4 5 6
2
3
7
7
8
8
8
9
9
9
10
11
11
12
12
13
13
14
14
15
6 7 8
2
9
14
5
9
7
7
8
9
11
12
13
14
10
12
11
Publicité
Table des Matières
