newmotion Home Advanced 2.1 Manuel D'installation page 12

3. PRODUCT OVERVIEW
3.5 BACKOFFICE CONNECTIONS
The Home Advanced can be connected to the
NewMotion backoffice in three ways:
1. Ethernet connection
2. GPRS 2G
3. 2/3/4G with NewMotion mobile router
The Home Advanced will connect to the New Motion
backoffice so settings can be changed remotely and
for remote support to be given. Without the backoffice
connection, none of our online services can be used.
3.5.1 HOME ADVANCED – ETHERNET /
NEWMOTION MOBILE ROUTER
Connecting the Home Advanced to an ethernet or
mobile router can be done by connecting the network
to the left UTP Ethernet data port with a cable max 50
meter long.
(Mobile)
Router
Settings might have to be changed in the network to
allow the charge point to make a successful connection
to the NewMotion backoffice.
The network should have:
- DHCP
- Port TCP 80 and 443 should be opened
- FTP port 21 should be opened
- All opened ports should be inbound and outbound
FTP is needed to update the firmware of the chargepoint
and exchange diagnostics.
INSTALLATIEHANDLEIDING – P12
INSTRUCTION MANUAL – P12 | P12
VERSION 0129NM02INT01
0382NM02INT03