newmotion Home Advanced 2.1 Manuel D'installation page 11

3. PRODUCT OVERVIEW
OVERVIEW TETHERED CABLE*
Connector for
communication
with the car to red wire
Connection
DC-protection
module
DC-protection
module
Earthing tethered cable
Tethered
cable inlet
Placement tethered cable
When installation is complete, place the plug of the cable in the designated dummy socket on the charge point.
Caution: The Phase 1 (Brown), Phase 2 (Black), Phase 3 (Grey) and Neutral (Blue) of the fixed cable must go through the
DC-protection module. Failing to do so will result in no protection against DC-fault current.
INSTALLATIEHANDLEIDING – P11
INSTRUCTION MANUAL – P11 | P11
INSIDE
VERSION 0129NM02INT01
0382NM02INT03
Tethered cable
connection
Keep the same order
as the connection
under relay
L1 = portal 1
L2 = portal 3
L3 = portal 5
Neutral = portal 7
cable clamp