Réinitialiser Les Données Raid - Asus P4P800 SE Guide De L'utilisateur

2. Pressez <Del> pour effacer le volume RAID.
3. L'utilitaire renvoie un message de confirmation, pressez <Y>.
5.61.6 Réinitialiser les données RAID
Copyright(C) 2003 Intel Corporation. All Rights Reserved. v3.x.x.xxxx
RAID Volumes:
None defined.
Non-RAID Disks:
Port Drive Model
0 ST380013AS
1 ST380013AS
Prenez garde en utilisant cette option; toutes les données des disques
RAID et toutes les structures RAID internes seront perdues !
Pour réinitialiser les données RAID et éliminer les structures RAID des
disques:
1. Choisissez 3. Reset RAID Data et pressez <Entrée>.
Resetting all RAID data will remove any internal RAID structures
from all RAID disks, including disks with working volumes. These
structures are used to maintain the RAID volumes. By removing
these structures, the drive will revert back to a Non-RAID disk
that can then be used or reallocated to a new RAID volume.
2. L'utilitaire renvoie un message de confirmation, pressez <Y>.
5-20
[ VOLUME DELETE VERIFICATION
Are you sure you want to delete this volume?
ALL DATA IN THE VOLUME WILL BE LOST!!
Are you sure you want to delete volume "RAID_Volume1"? (Y/N)
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RaID
4. Exit
[
DISK/VOLUME INFORMATION
Serial #
xxxxxxxx
xxxxxxxx
[ [ ]-Select ]-Select [ESC] Exit [ESC] Exit
[ RESET ALL DATA RAID DATA
WARNING: Selecting "Yes" will cause all data on any RAID disk
(RAID Volume or Other RAID Disk) to be lost.
Are you sure you want to destroy all RAID data (Y/N):
]
[ MAIN MENU ]
]
Size Status
74.5GB Normal
74.5GB Normal
[Enter]-Select Menu [Enter]-Select Menu
]
Chapitre 5: Support Logiciels
Bootable
Yes
Yes