Installing The Power Cord - LG LW1014CR Guide D'utilisation

Casement Window Installation
1. Installation procedure is the same as that descr ibed in steps 1 through 11 and step 13 of the
Horizontal Sliding Window installation.
2. If the window opening is wider than 15 3/4" y ou will need to install a filler panel. Make this
panel from 3/4" thick wood and run it the full length of the windo w.
Attach it securely to the windo w frame and paint it to protect it from the w eather.
3. Since styles and sizes of casement windows vary widely, it is advisable to have the air conditioner
installed by someone skilled in this type of installation.

Installing the Power cord

You can choose between the two methods below according to your preference and window sill
shape.
Using slit "A"
• Fasten the stopper using Type A screw, and
pass the power cord through slit "A".
°C
Screw (Type A)
Power cord
• Fasten the stopper using left screw hole, and
rotate properly to pass the power cord through
slit "B".
Screw (Type A)
A Power cord
Installation
Using slit "B"
°C
Owner's Manual 15
B