Power Hookup - Technogym ROTEX 600 XT PRO Manuel De L'utilisateur

1.3 I
NSTALLATION AND ASSEMBLY

1.3.4 Power hookup

Before connecting the equipment to the main power supply, ensure that the electrical system
is in compliance with applicable code. Check the information printed on the sticker near the
socket and on the cable:
7
4 8 1
01330007
D
ANGER
The wall socket must be located in a
place where the equipment can be
plugged in and unplugged easily and
safely.
The equipment switch must be set
at 0 (off) when plugging it in.
Connect the power cable first to the
equipment socket and then to the wall
socket.
If possible, protect the cable from damage
by using the supplied raceways.
2 5 6 3
148
1) Indicates the type of fuse: F 3A, 5 x 20
mm
2) Indicates the main power specifications:
110/230 Vac~ 50/60 Hz 150 VA
3) Indicates the
specifications:
4) Illustrates the main power switch:
I = on; 0 = off
5) Indicates a device with a type B applied
part
6) Indicates reference to user's manual
7) Indicates compliance with the CE
directives
8) Indicates the IMQ certification agency
marking
auxiliary socket
75 VA
148-1 Total body
25