Environmental Information - Flymo Power Trim 500 XT Instructions D'origine

4. On slopes, be extra careful of your footing and
wear non-slip footwear.
5. Do not walk backwards when trimming, you
could trip. Walk, never run.
6. Switch off before pushing the trimmer over sur-
faces other than grass.
7. Never operate the trimmer with damaged guards
or without guards in place.
8. Never fit metal cutting elements.
9. Keep hands and feet away from the cutting means at
all times and especially when switching on the motor.
10. Keep cutting head below waist level.
11. Do not lean over the trimmer guard whilst trimming or
edging - objects may be thrown by the cutting line.
12. Beware of cut-off pieces of nylon line ejected during use.
13. Never pick up or carry a trimmer by the cable.
14. Remove the plug from the mains:
- before leaving the trimmer unattended for any
period;
- before clearing a blockage;
- before checking, cleaning or working on the ap-
pliance;
• Awareness of the environment must be considered
when disposing of ʻend-of-lifeʼ product.
• If necessary, contact your local authority for disposal
information.
The symbol on the product or on its packaging in-
dicates that this product may not be treated as house-
hold waste. Instead it shall be handed over to the
applicable collection point for the recycling of electri-
cal and electronic equipment.
• Your product is uniquely identified by a silver and black product rating label.
• We strongly recommend that your product is serviced at least every twelve months, more often in a professional ap-
plication.
If any part is found to be defective due to faulty man-
ufacture within the guarantee period, Husqvarna UK
Ltd., through its Authorised Service Repairers will ef-
fect the repair or replacement to the customer free of
charge providing:
(a) The fault is reported directly to the Authorised
Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or
faulty adjustment by the user.
(d) The failure has not occurred through fair wear
and tear.
(e) The machine has not been serviced or repaired,
taken apart or tampered with by any person not
authorised by Husqvarna UK Ltd..
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
* This guarantee is additional to, and in no way di-
minishes the customers statutory rights.
Failures due to the following are not covered, there-
fore it is important that you read the instructions con-
tained in this Operator's Manual and understand
how to operate and maintain your machine:
Safety

Environmental Information

Service Recomendations
Guarantee and Guarantee Policy
ENGLISH - 2
- if you hit an object. Do not use your trimmer until
you are sure that the entire trimmer is in a safe
operating condition;
- if the trimmer starts to vibrate abnormally. Check
immediately. Excessive vibration can cause injury.
Maintenance and storage
1. Keep all nuts, bolts and screws tight to be sure
the trimmer is in safe working condition.
2. Replace worn or damaged parts for safety.
3. Only use the replacement cutting line specified
for this product.
4. Only use replacement parts and accessories rec-
ommended by Husqvarna UK Ltd.
5. After any maintenance in dealing with the cutting
line, always return the product to its normal operat-
ing position before switching on.
6. Clean unit with a dry cloth. Never use metal ob-
jects to clean the unit.
7. Inspect and maintain the trimmer regularly. Any re-
pairs must be carried out by an authorised repairer.
8. Store in a cool dry place and out of reach of chil-
dren. Do not store outdoors.
By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which could
otherwise be caused by inappropriate waste han-
dling of this product.
For more detailed information about recycling of this
product, please contact your local council office,
your household waste disposal service or the shop
where you purchased the product.
Failures not covered by guarantee
* Failures as a result of not reporting an initial
fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in
accordance with the instructions and recommen-
dations contained in this Operator's Manual.
* Machines used for hire are not covered by this
guarantee.
* The following items listed are considered as wear-
ing parts and their life is dependent on regular main-
tenance and are, therefore not normally subject to a
valid warranty claim: Nylon Line, Spool & Line
* Caution!
Husqvarna UK Ltd. does not accept liability
under the warranty for defects caused in whole
or part, directly or indirectly by the fitting of re-
placement parts or additional parts that are not
either manufactured or approved by Husqvarna
UK Ltd., or by the machine having been modified
in any way.