Fixture Cleaning - BoomToneDJ MEGAFLY 400 RGB Mode D'emploi

o If you have intermittent DMX signal problems, check the pins on
o Try to use another DMX controller.
o Check if the DMX cables run near or run alongside to high voltage cables

Some fixtures don't respond to the easy controller
o You may have a break in the DMX cabling.
o Check the LED for the response of the master/ slave mode signal.

No response to the sound
o Make sure the fixture does not receive DMX signal.
o Check microphone to see if it is good by tapping the microphone.

7. Fixture Cleaning

The cleaning of outside glass window must be carried out periodically to optimize light
output. Cleaning frequency depends on the environment in which the fixture operates:
damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on
the fixture's optics.
 Clean with soft cloth.
 Always dry the parts carefully.

Clean the external glass window at least every 20 days.
NEVER OPEN THE FIXTURE
There is no replacement part inside. Please contact your dealer for any
problem .
settings and
connectors or on PCB of the fixture or the previous one.
that may cause damage or interference to DMX interface circuit.
DMX polarity.
17