IKRA Gartenmeister GM AAS 4025 Mode D'emploi page 39

d) Remove adjustment tools or wrench-
es and the like before you switch the
power tool on. A wrench or other tool
that is inside or on a rotating part of the
tool may cause injury.
e) Avoid unusual postures. Make sure
to have a safe footing and keep your
balance at all times. This will allow you
to better control the power tool in unex-
pected situations.
f) Wear suitable clothes. Do not wear wide
clothing or jewellery. Keep your hair,
clothes and gloves clear of all moving
parts. Loose clothing, jewellery or long
hair may get caught in moving parts.
g) If dust extraction/collection devices
are provided make sure that they are
connected and used properly. The use
of a dust extraction device may reduce
risks caused by dust.
4) Use and handling of the power tool
a) Do not overtax the power tool. Use the
power tool intended for your type of
work in each case. The use of the suit-
able power tool within the stated range
of performance makes working more
effective and safer.
b) Do not use a power tool with a dam-
aged switch. A power tool that cannot
be switched on or off any more is dan-
gerous and must be repaired.
c) Pull the mains plug and/or remove
the battery before adjusting a tool,
changing accessories or putting the
tool aside. This precaution avoids the
unintentional start of the tool.
d) Store power tools that are currently
not used out of the reach of children.
Do not allow persons to use the tool
if they are not familiar with the tool or
these instructions. Power tools are dan-
gerous if used by inexperienced persons.
e) Thoroughly maintain your power
tool. Check whether moving parts are
working properly and are not jam-
GB | Operating Instructions
f) Keep cutting tools sharp and clean.
g) Use power tools, accessories, add-on
5) Battery tool use and care
a) Recharge only with the charger spec-
b) Use power tools only with specifically
c) When battery pack is not in use, keep
d) Under abusive conditions, liquid may
14
ming/sticking, and whether parts are
broken or otherwise damaged in a
way that may affect the function of
the power tool. Have damaged parts
repaired before using the tool. Many
accidents are the result of poorly main-
tained power tools.
Thoroughly maintained cutting tools with
sharp cutting edges are jamming less
often and are easier to guide.
tools, etc. in accordance with these
instructions and in the way prescribed
for the respective type of tool. You
should also consider the working con-
ditions and the work to be carried out.
The use of power tools for purposes oth-
er than those intended for the respective
tool may result in dangerous situations.
ified by the manufacturer. A charger
that is suitable for one type of battery
pack may create a risk of fire when used
with another battery pack.
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another. Shorting the battery termi-
nals together may cause burns or a fire.
be ejected from the battery; avoid
contact. If contact accidentally oc-
curs, flush with water. If liquid con-
tacts eyes, additionally seek medical
help. Liquid ejected from the battery may
cause irritation or burns.