Before Using The Device; Delivery Status - Gloria 000293.000 Mode D'emploi

RZ_POWERBRUSH_DE_GB_FR_NL_978466-02.qxp_Text_GB 15.01.18 11:48 Seite 21
brushing equipment can be flung
out uncontrollably. keep bystanders
away from the danger zone. In order
to prevent injuries, pay attention to
safety in the work area.
The device is not suitable for hori-
zontal use (house walls), overhead
work (ceilings), for unsuitable floor
or joint materials or for other appli-
cation areas as those described .
Ensure that the ventilation slots are
free of dirt.
Wear protective gloves during
assembly and cleaning work!
CAuTION! RISk OF INJuRY FROM
ROTATING BRuShING TOOL!
Never lift or carry the device with
running motor! Switch motor off
and disconnect mains plug when
moving device to and from work
area, or tilting device.
Never remove the supplied safety
guards.
CAuTION! RISk OF INJuRY
FROM FLYING PARTS!
The safety start switch must never
be fixed or short-circuited.
Only clean during daylight or with
adequate artificial lighting.
Never use the device during rain.
Never clean if others, in particular
children or animals, are in the area!
Never start the device in
a tilted position!
Never put your hands or
feet near to the rotat ing
brushing equipment!
Ensure that sufficient
distance is kept between
hands, feet and brushing
equipment. Brushing tools
continue to turn.
Do not start or operate the
device if bystanders are in
the danger zone.
Start or operate the
device as described in the
operating instructions.
During cleaning, pay attention to
safe and solid position.
Guide device only at walking
pace.
CAuTION! RISk OF INJuRY FROM
uNINTENTIONAL SWITCh ON!
Accidental activation can cause
injuries. To prevent this, unplug
mains plug when:
– leaving device unsupervised.
– maintaining, checking or cleaning
device.
– device shows signs of
malfunction.
3

Before using the device

This chapter contains information about
the delivery status.

3.1 Delivery status

The device is shipped as standard as
follows:
Device pre-assembled with telescopic
tube
Additional handle for telescopic tube
(not assembled)
Surface brush with safety guard
Side brush with safety guard
(not assembled)
1 x user manual and product inform a -
tion
Any tools are individually packed.
21