RZ_MULTIBRUSH_DE_GB_FR_NL_978410-1_Text_GB 10.11.16 15:55 Seite 23
- the device may have been
dropped before.
- foreign objects have wrapped
around the drive shaft.
Never disable any safety devices.
Check area to be cleaned
beforehand to avoid damage to
device / objects or injuries to living
beings. Stones, pieces of wood,
wires or the like, as well as other
foreign objects must be removed.
Objects that are caught by the
brushing equipment can be flung
out uncontrollably. Keep bystanders
away from the danger zone. In order
to prevent injuries, pay attention to
safety in the work area.
Never use the device on house walls
or similar, always work vertic ally so
that the brushes are pointed at the
ground.
Ensure that the ventilation slots are
free of dirt.
CAUTION! RISK OF INJURY FROM
ROTATING BRUSHING TOOL!
Never lift or carry the device with
running motor! Switch motor off
and disconnect mains plug when
moving device to and from work
area, or tilting device.
Never remove the supplied safety
guards.
CAUTION! RISK OF INJURY
FROM FLYING PARTS!
Never start the device in
a tilted position!
Never put your hands or
feet near to the rotat ing
brushing equipment!
Ensure that sufficient
distance is kept between
hands, feet and brushing
equipment. Brushing tools
continue to turn.
Do not start or operate the
device if bystanders are in
the danger zone.
Start or operate the
device as described in the
operating instructions.
The safety start switch must never
be fixed or short-circuited.
Only clean during daylight or with
adequate artificial lighting.
Never use the device during rain.
Never clean if others, in particular
children or animals, are in the area!
During cleaning, pay attention to
safe and solid position.
Guide device only at walking
pace.
CAUTION! RISK OF INJURY FROM
UNINTENTIONAL SWITCH ON!
Accidental activation can cause
injuries. To prevent this, unplug
mains plug when:
– leaving device unsupervised.
– maintaining, checking or cleaning
device.
– device shows signs of
malfunction.
3
Before using the device
This chapter contains information about
the delivery status.
3.1 Delivery status
The device is shipped as standard as
follows:
Device pre-assembled with telescopic
tube
Second handle on telescopic tube
Surface brush with safety guard
Joint brush with safety guard
1 x user manual and product inform a -
tion
Any tools are individually packed.
23