Nordica Milly Manuel Utilisateur page 30

PLEASE ALwAyS bE PRESENT DuRINg THIS PHASE.
The CONTROL ReguLATION DuRINg THE IgNITION PHASE is the following :
Ignition phase
How to set the machine to bOIL wATER
• keep the flue gas register on the cooker function – hOTPLATe use.
• Primary air CLOseD.
• secondary air completely open.
• Load wood as described in the manual (hourly load = hourly consumption).
How to set the machine to COOk bISCuITS
• keep the flue gas register on the cooker function – OveN COOkINg use 36mm OPEN.
• Primary air CLOseD.
• secondary air completely OPeN.
• switch the cooker on with a moderate load of wood until the oven thermometer indicates 180 °C.
• wait for 220-230 °C to be reached without additional wood being loaded.
• Load a single piece of wood weighing 500 - 600 g one at a time and wait for it to burn completely before adding another.
• This keeps the oven temperature stable around 220-230 °C.
• Place the tray of biscuits in the medium position for 10 minutes.
• Turn the tray halfway through cooking, if necessary.
30
PRImARy air
OPeN
ENGLISH
SECONDARy air
OPeN
SmOkES control
hOb COOkINg function