Features; Assembly - Ryobi CD100 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Chuck .......................................................... 3/8 in. Keyless
Motor ..................................................................12 Volt DC
Switch ..............................VSR (Variable Speed Reversible)
kNOW yOUR DRILL-DRIVER
See Figure 1, page 12.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCk)
Your drill has a direction of rotation (forward/reverse
lock) selector located above the switch trigger for changing
the direction of bit rotation. Setting the switch trigger in the
OFF (center lock) position helps reduce the possibility of
accidental starting when not in use.
UNPACkING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.

FEATURES

No Load Speed .................................... 0-600 r/min. (RPM)
Torque .................................................... Maximum 90 in.lb.
kEyLESS ChUCk
The keyless chuck allows you to hand-tighten or release the
drill bit in the chuck jaws.
MAG TRAy
The magnetic tray conveniently stores screws or other
small parts.
GRIPZONE
Ergonomic handle with GripZone™ overmold improves
/
center
comfort and grip.
VARIAbLE SPEED
The switch trigger delivers higher speed with increased
trigger pressure and lower speed with decreased trigger
pressure.

ASSEMbLy

PACkING LIST
Drill-Driver
Bit
Operator's Manual
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use
of this product that is not properly and completely
assembled could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
7 — English
(SCREW hOLDER)
™
™