Features; Assembly; Operation - Ryobi QUIETSTRIKE P290 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Coupler/Chuck .......................................................... 1/4 in.
No-load speed .................................................. 0-3,200/min
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes and other possible
serious injuries.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.

FEATURES

Impacts Per Minute ..........................................0-2,200 IPM

ASSEMBLY

WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious personal injury.

OPERATION

APPLICATIONS
You may use this product for the purposes listed below:
 Driving long deck screws, driving carriage bolts into deck
posts; driving Tapcon
crete; driving screws into metal studs
HYDRAULIC IMPACT TOOL
This impact driver uses oil to transfer the impacting motion,
resulting in quieter operation. Prolonged periods of heavy
use can cause the oil in the tool to overheat, resulting in
slower driving. If you experience decreased performance,
allow the tool to cool before resuming operation.
NOTE: When operating the tool in extreme cold
temperatures, it may be necessary to warm the oil before
use. To do this, pull and hold the trigger with no load for
several seconds before beginning operation.
5 — English
screws into block walls and con-
®