2. INSTALLATION INSTRUCTIONS (continued)
Proper operation of the appliance is guaranteed only if the following conditions are met:
The room temperature where the appliance is located conforms to class stated on rating label.
Maximum ambient relative humidity: RH75%.
The appliance must be placed at a sufficient distance from heat sources (e.g., ovens, central
heating, direct sunlight, etc.).
The appliance must be located in such a place that it is protected against the effects of weather.
Regular maintenance is performed according to the instructions in this user's manual.
The ventilation openings on the appliance must not be covered.
Correct installation (e.g. leveling, capacity corresponds to the specifications on the rating label).
REVERSING THE DOOR
IMPORTANT: THIS OPERATION REQUIRES AT LEAST TWO (2) PERSONS.
A
1
Open the d o or to a 90 degree an g le, ta k e
out the 2 screws from lower door axis (2),
remove th e door (3)a n d th e axi s plate from
the door.
C
5
The door revolves 180 degrees.
D
5
Remove the decorative nails (6) from the
top left of the cabinet and install the
spare top hinge (Left) (5) at to p left of the
cabinet with 3 screws.
2
3
6
B
Take out the 3 hinge screws from the top
right hinge (4) and remove it.
Note:
This operating requires two persons.
E
Install the door once correctly aligned.
4
7
18