Safety Regulations; Proper Use - EINHELL RG-SP 300 RB Mode D'emploi D'origine

Anleitung_RG_SP_300_RB_SPK1__ 17.06.13 07:36 Seite 11
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.

1. Safety regulations

Caution!
The pump must be powered via an earth-leakage
circuit breaker (RCD) with a rated fault current of
no more than 30 mA (according to VDE 0100 Part
702 and 738).
The equipment is not designed for use in
swimming pools and paddling pools of any kind
or other bodies of water in which people or
animals may be present during operation. It is
prohibited to operate the equipment if a person
or animal is in the danger area. Ask your
electrician!
This equipment can be used by
children of 8 years and older and by
people with limited physical,
sensory or mental capacities or
those with no experience and
knowledge if they are supervised or
have received instruction in how to
use the equipment safely and
understand the dangers which
result from such use. Children are
not allowed to play with the
equipment. Unless supervised,
children are not allowed to clean
the equipment and carry out user-
level maintenance work.
Important!
Before you put the equipment into operation,
n
arrange for a specialist to check that the
- earthing
- protective multiple earthing
- residual-current operated circuit-breaker circuit
comply with the safety regulations of the power
supply company and work correctly.
The electrical plug-in connections must be
n
protected from wet conditions.
If there is a risk of flooding, place the plug-in
n
connections in an area which is safe from
flooding.
Strictly avoid pumping aggressive liquids and
n
abrasive substances.
Protect the equipment from frost.
n
Protect the equipment from dry running.
n
Take suitable measures to keep the equipment
n
out of the reach of children.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Figs. 1 and 2)
1. Carry handle
2. Mains cable
3. Float switch
4. Intake cage
5. Float switch mounting
6. Aluminium tube, long
7. Aluminium tube, short
8. Aluminium tube with attachment hook
9. Swiveling connection with stopcock

3. Proper use

The equipment you have purchased is designed to
pump water with a maximum temperature of 35 °C.
This equipment must never be used for other liquids,
especially engine fuels, cleaning agents and other
chemically-based products! Installed in a shaft, the
equipment provides protection from flooding.
However, it can be used wherever you want to move
water, e.g. in the house, in the garden, and for many
other applications. The equipment must not be used
to operate swimming pools!
GB
11