PROMAT 4000873344 Mode D'emploi page 10

 The product is not intended for operation in altitudes of over 2000 meters.
 The products included in this delivery may not be altered or modified.
 The product may only be connected to a power mains socket (230V~/50Hz)
which is according to regulations.
 Treat the product with care. Avoid mechanical shock,, impact or dropping it
from any height. The product may be damaged.
 Do not disassemble the unit or attempt to modify or repair it yourself. It does
not contain parts serviceable by you. In case of questions or problems, turn
to our customer service.
Intended Use
 The LED spotlight is intended for temporary illumination. It may be operated in
outdoor areas and can be exposed to rain (IP 65).
 No part of the product may be modified or converted!
 The safety instructions must be observed at all times!
 Make sure the connection cable cannot become a tripping hazard. If operated
outdoors, make sure no water can enter the housing or the socket.
 If the LED spotlight is operated outdoors an earth leakage circuit breaker must
be installed (FI protective switch).
Maintenance and Storing
Do not use aggressive chemicals, solvents or abrasives to clean the LED spotlight.
Do not allow liquids of any kind to enter the lamp or immerse the lamp in liquids of
any kind.
Store the lamp in a place away from direct sunlight, dust, humidity, extreme
temperatures and vibrations and out of the reach of children.
6
Operation