Technical Information; Installation Considerations - Hansgrohe AXOR Starck Semi-Pro 10820001 Instructions De Montage / Mode D'emploi / Garantie

1⅛"
⅛"
4"
1⅜"
⅜
Tools Required / Outiles Utiles /
Herramientas Útiles
16 mm
2
11⅞"
10⅝"
9⅜"
2⅛"
9 mm
English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
Hole size in mounting surface
Max. depth of mounting surface
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• Protection against backflow is provided by a
double check valve.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
2.2 GPM
1½"
2⅜"