Teka HL-870 Guide Rapide D'utilisation page 40

3172484-000 EPIFA.QXD:-
How to use the oven cleaning cycle
1. First remove the trays and all accessories
from the oven interior, including the tray
supports and telescopic guide rails.
Caution
Do not clean the oven and tray at the same
time using the TEKA Hydroclean
you will not obtain good results. To clean the
tray, follow the instructions provided below.
2. With the oven cold, gently pour 250 ml of
water into the bottom of the oven cavity.
3. Touch the sensor
on.
4. Turn the function selector anti-clockwise
until the symbol
timer display.
40
15/6/11 12:09 Página 40
®
function as
to switch the oven
appears on the
5. You will hear a beep indicating that the
Hydroclean ® has started. Symbol
will flash slowly and the time remaining to
complete the cleaning cycle will appear on
the display.
IMPORTANT
The duration of this cycle cannot be changed.
To stop before completion of the cycle, turn
the oven off by touching the sensor
6. When the cycle is finished, the oven will
turn itself off, an alarm will sound and
symbol will flash quickly.
7. Touch any sensor with your fingertip to stop
the alarm and to turn off symbol
8. Any traces of dirt and excess water can
now be removed with a damp cloth.
How to use the tray-cleaning cycle
TEKA Hydroclean ® enamel's excellent proper-
ties mean that any traces of cooked food can
easily be removed from the trays. If stubborn
traces of cooked food remain after normal
cleaning, do the following:
1. Place the tray that needs cleaning on the
middle shelf support.
2. With the oven cold, slowly pour 250 ml of
water into the tray.
3. Select the TEKA Hydroclean
tion.
.
.
® cleaning func-