Caring For The Dishwasher - Pelgrim GVW300L Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE

Caring for the dishwasher

Frost precaution
Please take frost protection measures on the dishwasher in winter. Every time after a washing
cycle, please operate as follows:
Cut off the electrical power to the dishwasher at the supply source.
Turn off the water supply and disconnect the water inlet pipe from the water valve.
Drain the water from the inlet pipe and water valve (use a pan to gather the water).
Reconnect the water inlet pipe to the water valve.
Remove the filter at the bottom of the dishwasher and use a sponge to soak up water in
the sump.
After every wash
After every wash, turn off the water supply to the appliance and leave the door slightly
open so that moisture and odours are not trapped inside.
Remove the plug
Before cleaning or performing maintenance, always remove the plug from the socket.
No solvents or abrasive cleaning
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive
cleaning products. Only use a cloth with warm soapy water. To remove spots or stains from
the surface of the interior, use a cloth dampened with water an a little vinegar, or a cleaning
product made specifically for dishwashers.
When not in use for a longtime
It is recommend that you run a wash cycle with the dishwasher empty and then remove the
plug from the socket, turn off the water supply and leave the door of the appliance slightly
open. This will help the door seals to last longer and prevent odours from forming within
the appliance.
Moving the appliance
If the appliance must be moved, try to keep it in the vertical position. If absolutely
necessary, it can be positioned on its back.
EN 22

Publicité

Table des Matières
loading

Table des Matières