Technical Specifications - Velleman CAMTVI17 Mode D'emploi

Note: black-and-white images are much clearer and contain less noise at
low light levels.
5.7 COLOR
Use this menu to set the different colour adjustments.
5.8 DNR
Use this menu to set the digital noise reduction level.
5.9 IMAGE
Use this menu to adjust the image settings.
5.10 MOTION
Use this menu to adjust the motion detection settings.
5.11 SYSTEM
Use this menu to adjust the general system settings.
5.12 EXIT
Use this option to exit the menu without saving.
6.

Technical specifications

IP rating...................................................................... IP66
pick-up element ..................... 1/2.9" Sony CMOS image sensor
pixels ................................................... 1920 (H) x 1080 (V)
resolution .......................................................... 1080P video
digital signal processor ..................................Eyenix EN-771 C
IR LEDs.................................................. 6 x high-power SMD
IR-cut filter .................................................................... yes
max. IR projection distance ........................................... 60 m
S/N ratio ................................................... > 50 dB (AGC off)
electronic shutter .................................... 1/25 - 1/50.000 sec
lens
CAMTVI17 .................................................. f2.8~12 mm
CAMTVI17Z ................................................... f6~22 mm
BLC .............................................................................. yes
WDR ............................................................................. yes
AGC ............................................................................. yes
V. 01 – 24/10/2018
CAMTVI17/CAMTVI17Z
5 ©Velleman nv