Technical Specifications - Velleman CAMTVI7N2 Mode D'emploi

CAMTVI7N2/CAMTVI7WN2/CAMTVI8N2/CAMTVI8WN2
7.8 DNR
Use this menu to set the digital noise reduction level.
7.9 IMAGE
Use this menu to adjust the image settings.
7.10 MOTION
Use this menu to adjust the motion detection settings.
7.11 SYSTEM
Use this menu to adjust the general system settings.
7.12 EXIT
Use this option to exit the menu without saving.
8.

Technical specifications

IP rating...................................................................... IP66
pick-up element .............................1/2.9" CMOS image sensor
pixels ................................................... 1920 (H) x 1080 (V)
resolution .......................................................... 1080P video
DSP ............................................................Eyenix EN-771 C
min. illumination ............................................ 0.001 lux/F2.0
IR-cut filter .................................................................... yes
S/N ratio ................................................... > 50 dB (AGC off)
WDR ............................................................................. yes
AGC ............................................................................. yes
white balance ....................................................... automatic
video output ................................................. BNC connection
TVI signal ............................................................ 1080P
PAL video ............................................................. 960H
CVI signal ............................................................ 1080P
AHD signal .......................................................... 1080P
audio ............................................................................. no
power supply ........................................................... 12 VDC
operating temperature ............ -10 °C to 40 °C - RH max. 95 %
V. 01 – 29/10/2018 7 ©Velleman nv