Error Message; Service, Maintenance, Disposal; Cleaning; Service, Maintenance - KERN MPB Série Mode D'emploi

8 Error message

Messages can be displayed when the balance are switched on or in operation.
Lo : Batteries are run down
ErrL : The balance detects underload
The weighing plate was loaded during switch-on, empty the weighing plate.
ooooo:
Err: Overload, too high load on weighing plate

9 Service, maintenance, disposal

9.1 Cleaning

Disconnect the unit from the mains power supply prior to cleaning.
Do not use aggressive cleaning agents (solvents or similar) but only a damp cloth
with mild soapsuds, or household cleaner. Ensure that no liquid gets inside the unit
and rub with a soft, dry cloth.
Loose dirt can be removed carefully with a brush or hand-held vacuum cleaner.
Balance must not be tilted or rotated for cleaning, as damage may occur.
Remove dirt immediately.

9.2 Service, maintenance

The appliance may only be opened by trained service technicians who are author-
ized by KERN.
Before opening, disconnect from power supply.

9.3 Disposal

Disposal of packaging and appliance must be carried out by operator according to
valid national or regional law of the location where the appliance is used.
MPB / MXS -BA-e-1614 23