Getting started
Location and function of controls
This manual mainly explains operations using the buttons on the unit, but the same
operations can also be performed using the remote control having the same or similar
names.
Unit
Without turning off the power of the unit, place your hand over the center of the top panel
(page 9). The backlight lights up and the function buttons are displayed. If no button
operation is performed for more than 20 seconds, the button display turns off automatically.
NETWORK button/indicator
Tap to switch the unit to NETWORK
mode.
Tap to use various music services or
listen to music stored in a device on the
home network with the unit.
(BLUETOOTH)
indicator
Tap when pairing or connecting with a
BLUETOOTH device or listening to music
with a BLUETOOTH device.
Tap once to switch the unit to
BLUETOOTH mode. Tap and hold to
switch the unit to pairing mode.
8
US
PAIRING button/
Rear of the unit
USB-A button/indicator
Tap to listen to music in a device
connected to the USB A port (
USB-A indicator lights up when tapped.
USB-B button/indicator
Tap to listen to music in a device
connected to the USB B port (
USB-B indicator lights up when tapped.
AUDIO IN button/indicator
Tap to listen to music in a device
connected to the AUDIO IN jack. The
AUDIO IN indicator lights up when
tapped.
A). The
B). The