Installation Location; Ambient Temperature And Ventilation - Bosch KSL Série Mode D'emploi

en

Installation location

A dry, well ventilated room is suitable as
an installation location. The installation
location should not be exposed to direct
sunlight and not placed near a heat
source, e.g. a cooker, radiator, etc. If
installation near a heat source is
unavoidable, use a suitable insulating
plate or observe the following minimum
distances to a heat source:
3 cm to electric or gas cookers.
■
30 cm to an oil or solid-fuel cooker.
■
If installing the appliance next to another
refrigerator or freezer, ensure a minimum
lateral distance of 2 cm to prevent the
formation of condensation.
The floor of the installation location must
not give way; if required, reinforce floor.
If the floor is uneven, use the two height-
adjustable feet. Two rollers at the rear of
the appliance facilitate installation, Fig.
#.
28
Ambient temperature
and ventilation
Ambient temperature
The appliance is designed for a specific
climate class. Depending on the climate
class, the appliance can be operated at
the following temperatures.
The climate class can be found on
the rating plate. Fig. 3
Climate class
SN
N
ST
T
Note
The appliance is fully functional within
the room temperature limits
of the indicated climatic class. If
an appliance of climatic class SN
is operated at colder room temperatures,
the appliance will not be damaged up to
a temperature of +5 °C.
Ventilation
Fig. $
The air on the rear
panel of the appliance heats up.
Conduction of the heated air must
not be obstructed. Otherwise,
the refrigerating unit must work harder.
This increases power consumption.
Therefore: Never cover or block
the ventilation openings!
Permitted ambient
temperature
+10 °C to 32 °C
+16 °C to 32 °C
+16 °C to 38 °C
+16 °C to 43 °C