IRIS – Iris RP Mk II Digital Infrared Receiver
Left side
Headphone socket, mini jack 3.5 mm
Volume control
Mounting clip
µ Charging contacts on the underside
5.2
Operating instructions
•
Plug the headphones into the headphone socket
•
Switch on the receiver at the on/off switch
•
Use the language selector
•
In the event of a signal drop-out, the headphone output is muted automatically.
•
If the headphones are disconnected from the receiver, the receiver automatically switches off after
5 minutes if the headphones are not re-connected.
•
The receiver is fitted with a lithium-ion rechargeable battery. As soon as the power on display
illuminated red, you should re-charge the receiver as there are less than two hours of operating time
left.
Back
.
by pressing it briefly.
to choose the language you would like to hear.
53
µ
is