Mode Selection - Cameo PAR 56 CAN CLP56RGB10 Manuel D'utilisation

MODE SELECTION:

Programmes
STATIC COLOUR mODE:
Press the mode button and use the up and down buttons to select one of the 7 desired
colours. 1, Red 2, Green 3, Blue 4, Yellow 5, Cyan 6, Purple 7 White
COLOUR CHANGING mODE
Press the mode button to select the Colour Change programme. The unit will then run in Colour
change mode. Press the up and down buttons to select the colour change speed from 0-99.
COLOUR FADING mODE
Press the mode button to select Fade mode. The unit will then run in colour fade mode. Press
the up and down buttons to select the fade speed from 0-99.
AUTO RUNNING mODE
Press the mode button to select Auto mode. The unit will then run automatically through all
of the built-in programmes. The run speed can be pre-set via the speed of the colour change
and colour fade modes.
SOUND CONTROL mODE
Press the mode button to select sound mode. The unit will then run via the sound. Press the
up and down buttons to adjust the sound sensitivity levels.
SLAVE mODE
Press the MODE button to enter SLAVE MODE.
Link the slave unit and the master unit via DMX cable. The slave unit will follow in sequence
with the master unit.
8