External Video Port
The external video port allows you to
connect an external monitor or LCD
projector. In order to connect an external
video device, follow these easy steps:
1
Align the connector with the port opening.
2
Push the connector into the port until it is
seated.
3
Tighten the two hold-down screws,
located on each end of the connector.
W
HEN AN EXTERNAL MONITOR IS PLUGGED IN
CHANGE YOUR SELECTION OF WHERE TO SEND YOUR DISPLAY VIDEO
COMBINATION
PANEL ONLY
HDMI
DISPLAY
ALL OF THESE STEPS MAY NOT BE AVAILABLE
Microphone/Line-In Jack
The microphone/line-in jack allows you to connect an external mono microphone. Your microphone must
be equipped with a 1/8"(3.5 mm) mono mini-plug in order to fit into the microphone jack of your
notebook. In order to connect a microphone follow these easy steps:
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated.
,
YOU WILL STEP TO THE NEXT CHOICE
,
EXTERNAL MONITOR ONLY
,
LCD
HDMI. N
AND BOTH
AND
83 - Device Ports
Figure 39. Connecting an External Video Device
,
[F
] + [F10]
PRESSING THE
N
. T
HE CHOICES
,
-
BOTH BUILT
IN DISPLAY PANEL AND EXTERNAL MONITOR
OTE THAT DEPENDING UPON SYSTEM CONFIGURATION
.
KEYS ALLOWS YOU TO
. E
ACH TIME YOU PRESS THE KEY
,
,
:
-
IN ORDER
ARE
BUILT
IN DISPLAY
,
,