Headphone Jack
The headphone jack allows you to connect headphones or powered external speakers to your notebook.
Your headphones or speakers must be equipped with a 1/8" (3.5 mm) stereo mini-plug. In order to connect
headphones or speakers follow these easy steps: (See Figure 5 on page 22 for location)
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated.
I
F YOU PLUG HEADPHONES INTO THE HEADPHONE JACK
DISABLED
External Video Port
The external video port allows you to connect an external monitor or LCD projector. In order to connect
an external device follow these easy steps: (See Figure 4 on page 21 for location).
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated.
3
Tighten the two hold-down screws, located on each side of the connector.
W
HEN AN EXTERNAL MONITOR IS PLUGGED IN
CHANGE YOUR SELECTION OF WHERE TO SEND YOUR DISPLAY VIDEO
COMBINATION
,
ONLY
MOVING TO THE EXTERNAL MONITOR ONLY
PANEL AND AN EXTERNAL MONITOR
.
,
YOU WILL STEP TO THE NEXT CHOICE
.
62 - Device Ports
,
-
THE BUILT
IN STEREO SPEAKERS WILL BE
,
[F
] + [F10]
PRESSING THE
N
. E
ACH TIME YOU PRESS THE KEY
,
STARTING WITH THE BUILT
,
FINALLY MOVING TO BOTH THE BUILT
KEYS ALLOWS YOU TO
-
IN DISPLAY PANEL
-
IN DISPLAY