Alpine MRD-M1001 Mode D'emploi page 15

Table des Matières

Publicité

5. Use the
or
button to adjust the parametric equal-
izer level.
• Adjustment Range:
±12 dB (1 dB step)
–12
dB
6. Press the ENT button.
BASS COMPENSATION MODE
Turning the bass compensation on and off
1. Press the
/
MODE button.
Press the
or
button until "COMP" is displayed.
2. Press the ENT button.
3. Press the
or
button until "ON.OFF" is displayed.
ON.OFF
4. Press the ENT button.
5. Press the
or
button to turn the bass compensa-
tion on or off.
The display changes each time one of the buttons is
pressed.
on
off
ON
6. Press the ENT button.
Adjusting the bass compensation mode select
1. Press the
/
MODE button until "COMP" is displayed.
COMP
2. Press the ENT button.
3. Press the
or
button until "SEL" is displayed.
SEL
4. Press the ENT button.
5. Use the
or
button to adjust the bass compensa-
tion mode select.
• Adjustment range:
COMP1/COMP2/COMP3
COMP1
6. Press the ENT button.
TIME CORRECTION MODE
Turning the time correction on and off
1. Press the
/
MODE button.
Press the
or
button until "TCR" is displayed.
2. Press the ENT button.
3. Press the
or
button until "ON.OFF" is displayed.
ON.OFF
4. Press the ENT button.
5. Press the
or
button to turn the time correction
on or off.
The display changes each time one of the buttons is
pressed.
on
off
ON
6. Press the ENT button.
Adjusting the time correction delay time
1. Press the
/
MODE button.
Press the
or
button until "TCR" is displayed.
2. Press the ENT button.
3. Press the
or
button until "TIME" is displayed.
TIME
4. Press the ENT button.
English
5. Appuyez sur la touche
de l'égalisateur paramétrique.
• Plage de réglage:
±12 dB (par pas de 1 dB)
6. Appuyez sur la touche ENT.
MODE DE COMPENSATION DES GRAVES
Activer et désactiver la compensation des graves
1. Appuyez sur la touche
Appuyez sur la touche
soit affiché.
2. Appuyez sur la touche ENT.
3. Appuyez sur la touche
soit affiché.
4. Appuyez sur la touche ENT.
5. Appuyez sur la touche
sactiver la compensation des graves.
L'affichage change à chaque fois que l'on appuie sur
l'une des touches.
6. Appuyez sur la touche ENT.
Régler la sélection du mode de compensation des graves
1. Appuyez sur la touche
soit affiché.
2. Appuyez sur la touche ENT.
3. Appuyez sur la touche
soit affiché.
4. Appuyez sur la touche ENT.
5. Utilisez la touche
mode de compensation des graves.
• Plage de réglage:
COMP1/COMP2/COMP3
6. Appuyez sur la touche ENT.
MODE DE CORRECTION DE L'HEURE
Activer et désactiver la correction de l'heure
1. Appuyez sur la touche
Appuyez sur la touche
2. Appuyez sur la touche ENT.
3. Appuyez sur la touche
soit affiché.
4. Appuyez sur la touche ENT.
5. Appuyez sur la touche
sactiver la correction de l'heure.
L'affichage change à chaque fois que l'on appuie sur
l'une des touches.
6. Appuyez sur la touche ENT.
Régler le temps d'attente de correction de l'heure
1. Appuyez sur la touche
Appuyez sur la touche
2. Appuyez sur la touche ENT.
3. Appuyez sur la touche
soit affiché.
4. Appuyez sur la touche ENT.
Français
ou
pour régler le niveau
–12
dB
/
MODE.
ou
jusqu'à ce que « COMP »
ou
jusqu'à ce que « ON.OFF »
ON.OFF
ou
pour activer ou dé-
on
off
ON
/
MODE jusqu'à ce que « COMP »
COMP
ou
jusqu'à ce que « SEL »
SEL
ou
pour régler la sélection du
COMP1
/
MODE.
ou
jusqu'à ce que « TCR » soit affiché.
ou
jusqu'à ce que « ON.OFF »
ON.OFF
ou
pour activer ou dé-
on
off
ON
/
MODE.
ou
jusqu'à ce que « TCR » soit affiché.
ou
jusqu'à ce que « TIME »
TIME
5. Utilice el botón
o
para ajustar el nivel del ecua-
lizador paramétrico.
• Margen de ajuste:
±12 dB (por pasos de 1 dB)
–12
dB
6. Pulse el botón ENT.
MODO DE COMPENSACIÓN DE GRAVES
Activación y desactivación de la compensación de
graves
1. Pulse el botón
/
MODE.
Pulse el botón
o
hasta que se visualice "COMP".
2. Pulse el botón ENT.
3. Pulse el botón
o
hasta que se visualice "ON.OFF".
ON.OFF
4. Pulse el botón ENT.
5. Pulse el botón
o
para activar o desactivar la
compensación de graves.
La visualización cambia cada vez que se pulsa uno
de los botones.
on
off
ON
6. Pulse el botón ENT.
Ajuste de la selección del modo de compensación de graves
1. Pulse el botón
/
MODE hasta que se visualice
"COMP".
COMP
2. Pulse el botón ENT.
3. Pulse el botón
o
hasta que se visualice "SEL".
SEL
4. Pulse el botón ENT.
5. Utilice el botón
o
para ajustar la selección del
modo de compensación de graves.
• Margen de ajuste:
COMP1/COMP2/COMP3
COMP1
6. Pulse el botón ENT.
MODO DE CORRECCIÓN DE TIEMPO
Activación y desactivación de la corrección de tiempo
1. Pulse el botón
/
MODE.
Pulse el botón
o
hasta que se visualice "TCR".
2. Pulse el botón ENT.
3. Pulse el botón
o
hasta que se visualice "ON.OFF".
ON.OFF
4. Pulse el botón ENT.
5. Pulse el botón
o
para activar o desactivar la
corrección de tiempo.
La visualización cambia cada vez que se pulsa uno
de los botones.
on
off
ON
6. Pulse el botón ENT.
Ajuste de la corrección del tiempo de retardo
1. Pulse el botón
/
MODE.
Pulse el botón
o
hasta que se visualice "TCR".
2. Pulse el botón ENT.
3. Pulse el botón
o
hasta que se visualice "TIME".
TIME
4. Pulse el botón ENT.
Español
15

Publicité

Table des Matières
loading

Table des Matières